Introduction

• All safety instructions described below are intended to protect the user and other individuals from physical harm and property damage.
• Safety instructions are classified and described as shown below according to the level of harm or damage resulting from improper use.

Description of Symbols

To Page Top

Precautions for Use

Warning

• Keep out of reach of children. Do not let children play with the product.
  There is a risk of injury.

  

Caution

• Do not disassemble or attempt to repair the product by yourself.
  There is a risk of failure or accident.
  Do not use the product for any purpose other than keeping beverages cold for drinking.
  There is a risk of accidentally drinking the contents, suffering burns, or damaging the product.

• Do not use the product if you can hear the sound of water from inside the vacuum double-layer structure (vacuum layer) of the main body.
  If water in the vacuum layer seeps out, it may cause health problems if ingested.

  

• Check that the lid gasket and stopper gasket are attached and that there is no leakage of the beverage before using the product.
  There is a risk that the contents may leak, causing stains.
• Attach only the parts intended for use with the product.
  If any other parts are attached, there is a risk that the contents may leak, causing stains.
• Do not place the product near stoves, open flames, or other sources of extreme heat.
  There is a risk of burns or deformation or discoloring of the product.
• Do not heat the product in a microwave oven.
  There is a risk of injury or failure due to sparks.
• Do not put the product in a freezer.
  Contents may leak or the product may be damaged.
• Do not knock over, drop, strike, or expose the product to excessive shocks.
  There is a risk of damage to the product, reduction of its cold-retention ability, rusting, peeling of paint/printing/plating*, or leakage of contents.
  * Limited to products that include paint, printing, plating, or similar processing.
• Do not remove the seal that is applied to the bottom of the product.
  If it is removed, there is a risk of diminished cold-retention performance.
• Do not scratch or rub the surface of the main body, plastic parts, seal, or loop with fingernails or hard objects.
  Doing so may cause damage and peeling.
• Do not open or close the lid or stopper when the product is tilted.
  Doing so may cause the beverage to overflow.
  There is also a risk that the contents may leak, causing stains.
• Do not use the product in a moving vehicle.
  Doing so may result in staining of clothes or the interior of the vehicle. Using the product while you are driving is very dangerous, as you may be distracted.

To Page Top

Precautions when adding beverages

Caution

• Do not touch the brim of the product with a kettle spout or similar object.
  The product may fall over, causing injury or scratching or deformation of the product.
• Do not pour a beverage into the bottle while the stopper is attached.
  The contents may spill or the product may fall over, causing injury. The product may also be scratched or deformed.

• Be sure to fill the product with drink only up to the maximum level shown in the diagram.
  If too much is added, there is a risk that the contents may leak or overflow.

  

• Do not add hot liquids to the product.
  This product is for cold beverages only. Because the user drinks directly from the product, there is the risk that hot liquid may directly contact the throat, causing burns. Do not use this product with hot beverages.
• Never put dry ice into the product.
  Doing so is dangerous as the pressure inside the product may increase, causing the stopper and lid to become stuck, the contents to spray out, or parts to be damaged and fly off.
• Do not put milk, dairy products, or similar beverages into the product.
  The contents may decay or spoil. Leaving such beverages inside the product is dangerous, as they can create gases that raise the pressure inside the product as a result of decay or spoilage. This can cause the stopper and lid to become stuck, the contents to spray out, or the stopper unit to fly off, causing damage or injury.
• Do not put soups or beverages containing salt in the product.
  The contents may decay or spoil, or the product may rust.
• Do not put tea leaves or pieces of fruit in the product.
  These may clog the safety valve, causing pressure inside the product to rise. This may cause the stopper unit to fly off, causing damage or injury. They may also cause the stopper and lid to become stuck, or the contents to leak.
• Be sure to securely attach the lid and stopper.
  Failing to do so may damage the stopper unit or main body, and cause the components to fly off. There is a risk that the contents may leak, causing stains.
• Although this product can be used to hold alcoholic beverages, be sure to use it in a manner consistent with the laws and regulations of your country or region.

To Page Top

Precautions when carrying the product

Caution

• Do not leave the product in a place which may become hot, such as inside a car.
  If the product contains a carbonated beverage, the rise in temperature will cause the pressure inside the product to rise. There is a risk that the contents may leak, causing stains.
• Do not place the product in a bag when the exterior of the product is wet.
  There is a risk of rust, odor, or stains.
• Do not leave the product in a bag for a long time.
  The surrounding environment (humidity, salt) may cause rust or odors.
• When carrying the product in a bag, place it with the drinking opening facing up, and whenever possible fasten it in place so that it does not move around.
  If the product contains a carbonated beverage and moves around a lot, the carbonation in the beverage may quickly disappear, or the contents may spray out.
• When placing the product into a bag, place it standing up to prevent any possible leakage.
  There is a risk that the contents may leak, causing stains.

  

• The loop may come off or the lid or stopper may become loose in the following situations, resulting in the product falling and causing injury or damage.
  — The loop is torn or damaged.
  — The product is swung around by the loop.
  — The product is turned in a direction that causes the stopper to loosen or is subject to strong vibration or impact.
  — The loop is not securely attached.
• Before using a can holder, check that it has sufficient strength.
  If it does not have sufficient strength, the holder may become displaced or damaged, resulting in staining of clothes or the interior of the vehicle.
• When using a commercially available can holder, use a stationary type.
  If a hanging holder that is attached to the window or air conditioning outlet is used, it may come off. This may result in staining of clothes or the interior of the vehicle.
• Do not carry together with a PC, digital camera, or other electronic device.
  If the contents leak, the electronic device may be damaged or malfunction.

To Page Top

Precautions when drinking

Caution

• Do not open the lid immediately after shaking or dropping the product or exposing the product to excessive shock.
  There is a risk that the beverage may come out suddenly, resulting in staining of clothes or other items. Wait a while, and then open the lid slowly.
• When opening the product, press on the lid with a hand and open it slowly so that the gas inside the product can escape.
  There is the risk that the beverage may come out suddenly or spray out, resulting in stainingof clothes or other items.
• Drink all of the beverage as soon as possible.
  If a beverage is left inside for a prolonged period, gas may be produced by decomposition, increasing the pressure inside the product body. This may cause the stopper and lid to become stuck, or the contents to spray out.
  There is also the danger that it may damage the stopper unit or main body, and cause the components to fly off, or the contents may leak, causing stains.

To Page Top

Precautions when cleaning

Caution

• When the product contained a sports drink or fruit juice or alcoholic beverages, be sure to clean the product immediately after use.
  Even if you are out of the home and cannot clean it fully, immediately rinse out the inside of the product with water after use.
  Failure to do so may result in mold, rust, holes or other problems.
• Do not use chlorine bleach.
  It may cause rust, peeling of the paint/printing/plating*, and holes. The use of Tiger vacuum insulated bottle detergent (sold separately) is recommended.
  * Limited to products that include paint, printing, plating, or similar processing.
  Click here to purchase consumable parts.
• Do not use paint thinner, benzine, metal scrubbing brushes, polishing powder, cleansers, or similar substances.
  Doing so may cause rust, scratches, and loss of cold retention ability.

To Page Top