Do not soak the body or stopper for a long time when there is a risk that water may get into the parts.
Do not wash the body with the parts attached.
After washing the body, immediately use a dry cloth to wipe off the moisture. If all droplets are not wiped off, they may leave water stains, cause rust, or stain other items.
Do not use thinners, cleansers, bleaches, cleaning wipes, metallic scrubbing brushes, or nylon scrubbing brushes.
Do not use a dishwasher or dish dryer, or wash with boiling water. (The body and gaskets can be washed in a dishwasher and dryer.*Excluding the body of MTA-A050 VC and YC.)
Do not use boiling water. (This does not apply to the inside of the body or the gaskets.)
Be sure to attach the gaskets.
If the product will not be used for a long time, fully clean and dry it.
How to Clean Bottle Sling
Place the bottle sling in a laundry net.
Wash using a washing machine set to the handwash course or dry course, and dry well.
When red, rust-like spots or a substance that is rough to the touch appears
Such stains can be caused by minerals in water, such as calcium, magnesium, and iron. When cleaning these substances, please use citric acid, which is available at supermarkets and drug stores.
Dilute the citric acid (approximately 10 g) with lukewarm water, then pour it into the body.
After 2 to 3 hours, wash the body with a soft brush and then thoroughly rinse it.
Depending on the beverage, the beverage odor may remain on the gasket. In this case, leave the gasket in boiling water for approximately 30 minutes. If the odor is still remains, please purchase a new gasket (sold separately). Click here to purchase consumable parts.