instruction manual
- Vacuum Insulated Bottle [MCZ-DEF]
- How to Clean
INDEXProduct / Specifications
How to Clean
- Clean the product on the same day after each use.
- Use kitchen detergent (for table or cookware).
- Use a soft sponge or cloth.
- Clean the product frequently to prevent odors.
Parts to wash after each use
- Wash each part using a sponge and diluted detergent water or lukewarm water, then thoroughly rinse it with water.
- Wipe any droplets off with a dry cloth and dry the parts thoroughly.
- (C) Lid
- (D)* Lid gasket
- (E) Spout
- (F)* Stopper gasket
- (H) Main body
- (J) Cup
- (K) Inner stopper A
- (N) Inner stopper B
- (O)* Gasket (S)
- (P)* Gasket (L)
- * Remove and wash.
Caution
- Do not soak the main body, stopper unit (MCZ-E), or cup unit (MCZ-F) when cleaning them. There is a risk that water may get into the parts.
- Do not wash the main body with the parts attached.
- After washing the main body, immediately use a dry cloth to wipe off the droplets. If all droplets are not wiped off, they may leave water stains, cause rust, or stain other items.
- Do not use paint thinner, cleansers, bleach, cleaning wipes, metal scrubbing brushes, or nylon scrubbing brushes.
- Do not use a dishwasher or dish dryer, or wash with boiling water. Do not use boiling water. (Not including gaskets.)
- Be sure to attach the gaskets.
- If the product will not be used for a long time, fully clean and dry it.
If stains appear inside the main body
When red, rust-like spots or a substance that is rough to the touch appears
Such stains can be caused by minerals in water, such as calcium, magnesium, and iron. When cleaning these substances, please use citric acid, which is available at supermarkets and drug stores.
- Dilute the citric acid (approximately 10 g) with lukewarm water, then pour it into the main body.
- After 2 to 3 hours, wash the main body with a soft brush and then thoroughly rinse it.
- Fully dry the main body.
When an odor remains on the gasket
Depending on the beverage, the beverage odor may remain on the gasket. In this case, leave the gasket in boiling water for approximately 30 minutes. If the odor still remains, please purchase a new gasket (sold separately).
Click here to purchase consumable parts.
Attaching and removing the lid gasket (MCZ-E)
Removing
Grasp the lid gasket and remove it slowly.
Attaching
When attaching the lid gasket, be sure to put it on in the correct orientation.
Caution
- Be sure to attach the gasket in the correct position and orientation. Otherwise, the contents may leak.
Attaching and removing the stopper gasket (MCZ-E)
Removing
Grasp the stopper gasket and remove it slowly.
Attaching
When attaching the stopper gasket, be sure to put it on in the correct orientation.
Caution
- Be sure to attach the gasket in the correct position and orientation. Otherwise, the contents may leak.
Attaching and removing inner stopper A (MCZ-F)
Removing
Turn inner stopper A to remove it.
(N) Inner stopper B
Attaching
Securely attach inner stopper A and B, and press the close button.
(M) Close button
(N) Inner stopper B
Attaching and removing the gaskets (S and L) (MCZ-F)
(O) Gasket (S)
(P) Gasket (L)
Caution
- Grasp the edges of the gaskets and remove them slowly.
- When attaching the gaskets, be sure to seat them in the correct position and orientation. Otherwise, the contents may leak.