instruction manual

How to Clean

INDEXProduct / Specifications

How to Clean

  • Clean the product on the same day after each use.
  • Use kitchen detergent (for table or cookware).
  • Use a soft sponge or cloth.
  • Clean the product frequently to prevent odors.

Parts to wash after each use

  1. Wash each part using a sponge and diluted detergent water or lukewarm water, then thoroughly rinse it with water.
  2. Wipe any droplets off with a dry cloth and dry the parts thoroughly.
  • (A) Lid
  • (B) Inner stopper
  • (C) Gasket*
  • (E) Main body
  • * Remove and wash.


  • Do not soak the main body or stopper for a long time when there is a risk that water may get into the parts.
  • After washing the main body, immediately use a dry cloth to wipe off the droplets. If all droplets are not wiped off, they may leave water stains, cause rust, or stain other items.
  • Do not use paint thinner, cleansers, bleach, cleaning wipes, metal scrubbing brushes, or nylon scrubbing brushes.
  • Do not use a dishwasher or dish dryer, or wash with boiling water. Do not use boiling water. (Not including gaskets.)
  • Be sure to attach the gaskets.
  • If the product will not be used for a long time, fully clean and dry it.

If stains appear inside the main body

When red, rust-like spots or a substance that is rough to the touch appears

Such stains can be caused by minerals in water, such as calcium, magnesium, and iron. When cleaning these substances, please use citric acid, which is available at supermarkets and drug stores.

  1. Dilute the citric acid (approximately 10 g) with lukewarm water, then pour it into the main body.
  2. After 2 to 3 hours, wash the main body with a soft brush and then thoroughly rinse it.
  3. Fully dry the main body.

When an odor remains on the gasket

Depending on the beverage, the beverage odor may remain on the gasket. In this case, leave the gasket in boiling water for approximately 30 minutes. If the odor is still remains, please purchase a new gasket (sold separately).
Click here to purchase consumable parts.

When the gasket becomes stained

Depending on the beverage, the beverage color may remain on the gasket. There is no problem in using the gasket even if it becomes stained. If you are concerned about stains, please purchase a new gasket (sold separately).
Click here to purchase consumable parts.

Attaching and removing the stopper


Turn the stopper to remove it from the main body.

(A) Stopper
(E) Main body


Attach the stopper to the main body and turn to secure.

Attaching and removing the gasket


Grasp the gasket and remove it slowly.

(A) Stopper
(C) Gasket


When attaching the gasket, be sure to put it on in the correct orientation.


  • Be sure to attach the gasket in the correct position and orientation. Otherwise, the contents may leak.
(C) Gasket
MMP-K020,MMP-K021,MMP-T020,MMP-N020,MMP-D020,MMP-E001,MMP-K030,MMP-K031,MMZ-K035,MMZ-K35P,MMZ-K351,MMZ-F035,MMZ-T035,MMZ-K050,MMZ-K501,MMZ-K50D,MMZ-K060,MMZ-K601 (PDF)
TIGER FOREST uses cookies to realize and improve its functions.