instruction manual
- Vacuum Insulated Bottle [MMP-W / MMZ-W]
- How to Clean
How to Clean
INDEXProduct / Specifications
How to clean
- Clean the product on the same day after each use.
- Use kitchen detergent (for table or cookware).
- Use a soft sponge or cloth.
- When using a dishwasher, check the instruction manual for the dishwasher and detergent before using.
- Clean the product frequently to prevent odors.
Parts to wash after each use
- (A) Stopper part
*The gasket cannot be removed. - (B) Gasket
- (D) Body
- Wash each part using a sponge and diluted detergent water or lukewarm water, then thoroughly rinse it with water.
- Wipe the water off with a dry cloth and dry the parts thoroughly.
Caution
- Do not soak the body or stopper part for a long time when there is a risk that water may get into the parts.
- After washing the body, immediately use a dry cloth to wipe off the moisture. If all droplets are not wiped off, they may leave water stains, cause rust, or stain other items.
- Do not use paint thinner, cleansers, bleach, cleaning wipes, metal scrubbing brushes, or nylon scrubbing brushes.
- Do not place and/or wash the bottle in boiling water.
- If the product will not be used for prolonged period, fully clean and dry it.
If stains appear inside the body
When red, rust-like spots or a substance that is rough to the touch
Such stains can be caused by minerals in water, such as calcium, magnesium, and iron. When cleaning these substances, please use citric acid, which is available at supermarkets and drug stores.
- Dilute the citric acid (approximately 10 g) with lukewarm water, then pour it into the body.
- After 2 to 3 hours, wash the body with a soft brush and then thoroughly rinse it.
- Fully dry the body.
Removing and attaching the stopper part
Removing
Turn the stopper part to remove it from the body.
(D) Body
Attaching
Attach the stopper part to the body and turn to secure.
